The SPL2860 PIN Solar Panel Laminator

The SPL2860 PIN is a lifting pin laminator and is designed as the optimum laminator for development. The lifting pins allow panel lamination without air bubbles and rapid cycle times. The operator has control over the pin/heat cycle, the vacuum cycle, temperature, and duration. This laminator allows you to develop the optimum process for your specific panel characteristics.

The largest panel size is 28 inches by 60 inches. The cost effective Solar Panel Laminator becomes even more impressive because it allows you to develop your process without interrupting your production line. Precise process control coupled with the economical value of this laminator makes it a great solution for low to medium volume production or development environments.

bentriver_spl2860pin

 

Features of the SPL2860 PIN

  • Input 208-240 VAC 1 phase 50 amps
  • Maximum process temperature: 185° C
  • Panels up to 28″ X 60″
  • 80 psi compressed air 3 SCFM
  • 4″ exhaust outlet that is used to vent heat and fumes out of the room
  • Width: 69.3″, Depth: 41.4″, Height (lid open): 62″
  • Weight: 1250 lbs
  • Vacuum: 1 Torr or less within 2 min